20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3.
Remove the
Cage Nuts
from the
Depth Adjustment Rails
by pinching the two
Prongs
on the
Cage Nut
inwards.
Note:
Use a
Cage Nut Tool
(sold separately) if you are
having trouble removing the
Cage Nuts
from the
Depth
Adjustment Rails
.
4.
Reposition the
Mounting Rail
along the
Depth Adjustment
Rails
to the desired mounting depth and determine the new
Cage Nut
mounting locations.
Notes:
The distance between each of the
Mounting Rail
Adjustment Hole
is 7/8 inch.
5.
Insert the
Cage Nuts
into the required
Square Mounting
Holes
on the
Depth Adjustment Rails
. To install, insert one
side of the
Cage Nut
into the
Square Mounting Hole
and
push the other side into the
Square Mounting Hole
, until it
locks into place.
Note:
Use a
Cage Nut Tool
(sold separately)
if you are
having issues installing the
Cages Nuts
into the
Depth
Adjustment Rails
.
6.
Reposition the
Mounting Rail
again along the
Depth
Adjustment Rails
and insert the removed
M6 Screws
through the
Mounting Rail
and into the
Cage Nuts
in the
Depth Adjustment Rails
.
7.
Using a
Phillips Head Screwdriver
to tighten the
M6
Screws
. Be careful not to over-tighten the
M6 Screws
.
