StarTech.com RK219WALLV, Quick Start Manual

Page: 1 / 2

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: November 13, 2020 6:26 PM
Product Diagram (RK219WALLV)
Component Function
1
Cage Nut Holes
•
Secures the equipment to the
Wall Mount
Bracket
.
•
2U of rack mounting space.
2
Mounting Holes
•
6
Mounting Holes
, secures the
Wall Mount
Bracket
to a
Mounting Surface
.
•
The Wall Mount Bracket can be mounted
vertically or horizontally.
•
Requirements
For the latest requirements, please visit www.startech.com/RK219WALLV
•
(Optional) Cage Nut Tool
•
Phillips® Head Screwdriver
•
1U - 2U Equipment
2U 19in Steel Vertical Wall Mount Equipment Rack Bracket
Mounting the Wall Mount Bracket
Notes:
Product mounting should be completed by a certified professional as per the
local safety and building code guidelines.
Mounting structures vary, and it’s important to make sure that the type of structure
and mounting hardware used will properly support the mounted equipment. Failure to
do so may result in personal injury and/or equipment damage.
1.
Make sure the Mounting Surface is sturdy enough to support the weight of the
Wall Mount Bracket
and installed equipment combined, 125.3 lb. (56.7 kg).
2.
Test fit the
Wall Mount Bracket
to the
Mounting Surface
to ensure a proper fit
3.
Using a
Writing Utensil
, mark the 6
Mounting Holes
.
4.
Use the included
Wood Screws
(for wood surfaces only), to mount the
Wall Mount
Bracket to the Mounting Surface .
Installing Equipment
1.
Insert the one side of the
Cage Nut
into the
Cage Nut Hole
and apply pressure to
the other side of the
Cage Nut
until it snaps into place.
2.
Repeat step 2 to install the second
Cage Nut
into the
Wall Mount Bracket
.
Note:
If it is too difficult to install the M5 Cage Nuts by hand, use a Cage Nut Tool
(not included) to install the M5 Cage Nuts .
3.
Align the
Mounting Points
on the
Equipment
with the
M5 Cage Nuts
on the
Wall
Mount Bracket
.
Note:
The number of Mounting Points may vary depending on the type of
Equipment . The Equipment may have more than Mounting Points and may
require the installation of additional M5 Cage Nuts .
4.
Insert the
M5 Screws
(included) through the
Equipment’s Mounting Points
and
into the
M5 Cage Nuts
.
5.
Using a
Phillips Head Screwdriver
(not included), tighten the
M5 Screws,
being
careful not to over-tighten.
2
1