Instruction Manual
4
Operation
For complete operating instructions / specifications, please visit
www.startech.com/
R300WN22MOD
Default Settings
Default IP Address:
192.168.2.254
Username / Password:
root / default
1. Configure a system to be on the same subnet as the AP (e.g. 192.168.2.2 – 253).
2. Open your preferred web browser and enter the IP address
192.168.2.254
into the
address bar, then press Enter.
3. Enter your Username / Password to login to the web interface (Default:
root /
default).
4. From the menu at the top, select
System -> Operating Mode
, to select your preferred
mode from the available options, then click
Save & Reboot.
Router AP Mode
(R300WN22MOD /
ODx only)
In Router AP Mode, 802.11n/g/b compliant devices can connect to
the wireless network, with NAT to bridge LAN / WAN connections.
AP Mode
In access point (AP) mode, 802.11n/g/b compliant devices can
connect to the wireless network.
WDS Mode
Wireless distribution system (WDS) mode expands current wireless
coverage from other Wireless AP devices that are in WDS mode.
Client
Repeater AP Mode
WISP Client Repeater mode acts as a bridge between two
LAN segments over a wireless link, extending network coverage.
CPE + Repeater AP
Mode
WISP CPE + Repeater mode acts as a bridge between two LAN
segments over a wireless link, extending network coverage, with
NAT to bridge LAN / WAN connections
Summary of Contents for R300WN22MO5E
Page 4: ...Instruction Manual ii...
Page 12: ...Instruction Manual 7...
Page 13: ...Instruction Manual 8...
