5
Select the option “Install Drivers Automatically (Recommended)” and
2.
then click the Next button.
Windows should now start searching for the drivers. Once this has
3.
completed, click the Finish button.
Windows Vista/Server 2008 R2/7
When the Found New Hardware window appears on the screen,
1.
click on the “Locate and install drivers software (recommended)”
option. If prompted to search online, select the “Don’t search online”
option.
When prompted to insert the disc, insert the Driver CD that
2.
came with the card, into your CD/DVD drive and Windows will
automatically proceed to search the CD.
If a Windows Security dialog window appears, click the “Install this
3.
driver software anyway” option to proceed.
Once the driver is installed, click the Close button.
4.
How to Use
RAID Configuration
To setup a RAID array using the drives connected to the SATA
controller card, the BIOS level configuration menu must be accessed.
To access the configuration menu, during POST (computer startup),
the status display for the controller card will display. At this point,
pressing [CTRL] + [m] will enter the configuration menu. From the
configuration menu, the detected drives can be configured into any of
the supported RAID modes.
