Instruction Manual
3
Hardware Installation
1. Determine which bracket is required for your
computer system.
If you have a
full-
profile computer system
, attach the
Full-profile bracket.
If you have a
low-
profile computer system
attach the
Low-profile bracket.
To change the bracket
follow the below steps:
a) Using a small ratchet, or pliers (not included), remove both of the DVI-port standoff
screws located on the outside of the bracket.
b) Using a Philips head screw driver (not included), remove the screw located next to
the internal side of the DVI-port on the circuit board.
c) You can now remove the undesired bracket by pulling the bracket away from the
PEXHDCAP60L.
Installation
