Instruction Manual
2
Configuration
The card is specially designed to allow power output from the ninth pin of
the connector to enable power up of the connected devices without power
adapter. The card allows user to set each individual port with 5V, 12V, or
RI (no power). The user may also choose to draw the needed power from
the external system power supply.
Hardware Installation
Turn Off the power to your computer.
1.
Unplug the power cord and remove your computer’s cover.
2.
Remove the slot bracket from an available PCIe slot.3.
3.
To install the card, carefully align the card’s bus connector with the
4.
selected PCIe slot on the motherboard. Push the board down firmly.
Connect the system power source to the board’s power connector.
5.
Replace the slot backet’s holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
7.
