Instruction Manual
7
Schedule Tab
Configure scheduled actions for each outlet. Click on the
Set
button located on the top
corner of each outlet to modify an individual outlet. When the
Set
button is orange,
the outlet is ready to be configured.
Period:
An Action can be scheduled to occur yearly, monthly, weekly or daily at
a specific time for each individual outlet.
Time:
Set the time (hours and minutes) when you want the action to occur.
Action:
Set the action you want the outlet to perform, ON, OFF or Reboot.
ADD:
Click the
ADD
button to add this action.
Delete:
To delete a scheduled action, double-click
X
.
Save:
Saves all changes.
Network Tab
Configure the Auto-PING feature to ping an IP-addressable device and detect when
that device has stopped communicating. Click on the Set button located on the top
corner of each outlet to modify an individual outlet. When the Set button is orange,
the outlet is ready to be configured.
Ping:
Select this box to enable the Auto-Ping function.
Host:
Enter the IP address of the connected equipment.
PING Interval Time:
Set the time Interval to PING the connected device.
Ping Times:
If a device fails to respond to a ping continuously and exceeds the
specified amount of attempts, the PDU02IP can notify selected personnel via email or
SMS.
Reboot:
Select this box to reboot the outlet for the failed connected device.
Re-Ping Time:
The time interval before restarting the Auto-Ping function after the
connected device has been rebooted.
Save:
Saves all changes.
