Installing the Drivers
Once you have connected your Slot Saver card, the next time you turn on your computer
Windows will automatically detect that you have installed new hardware. Insert the
installation disk in your floppy drive, and follow the instructions below to install the
required software drivers. Note that you may need a Windows OEM CD to complete the
installation of some of the card components, depending on your Windows installation.
This may not be the same as a “Recovery CD” that is included by some manufacturers.
Contact your computer manufacturer if you need an original Windows installation CD.
Windows 98SE/ME
1. On startup, Windows will detect that new hardware has been installed (
PCI standard
PCI-to-PCI bridge
) and launch the
Add New Hardware Wizard
. Click
Next
and
choose the
Search for the best driver for your device (Recommended)
option.
Click
Next
.
2. Uncheck all boxes on this screen and click
Next
.
3. The Wizard will inform you that “Windows is now ready to install the best driver for
this device...” Click
Next
.
. The Wizard will complete the installation. Click
Finish
.
4. Windows will detect
PCI Mass Storage Controller
and launch the Add New
Hardware Wizard. Click
Next
and choose the
Search for the best driver for your
device (Recommended)
option. Click
Next
.
5. On the next screen select only
Specify a location
. Choose
Browse
.
6. In the file selection box, double click
3
1/2
Floppy (A:)
. Click
OK
.
7. The file location box under
Specify a location
will now contain the path to the files.
Click
Next
.
8. The Wizard will inform you that “Windows is now ready to install the best driver for
this device...” Click
Next
. The Wizard will complete the installation. Click
Finish
.
9. Windows will detect that additional new hardware has been installed (
NEC
Firewarden OHCI Compliant IEEE 1394 Host Controller
) and launch the
Add New
Hardware Wizard
. Click
Next
.
10. Choose the
Search for the best driver for your device (Recommended)
option.
Click
Next
.
11. Uncheck all boxes on this screen and click
Next
.
12. Windows will find more than one possible driver for the device. Under “What do you
want to install?” choose
The Updated Driver (Recommended)
and click
Next
.
13. The Wizard will inform you that “Windows is now ready to install the best driver for
this device...” Click
Next
.
. If prompted, insert the Windows installation CD
in your CD-ROM or other optical drive The Wizard will complete the installation.
Click
Finish
.
14. Windows will detect all remaining new hardware and install the drivers without
intervention.
Instruction Manual
3
