3
5. Place the expansion card bracket from the Mini Card in the opening and
fasten the card’s bracket to the rear of the case.
NOTE: If the system case/chassis only supports full profile brackets,
replacing the pre-installed low profile bracket with the included full profile
installation bracket may be necessary.
Driver Installation
Windows 2000/XP/Server 2003
1. Upon starting Windows, if the “Found New Hardware” wizard appears on
the screen, cancel/close the window and insert the included Driver CD
into the computer’s CD/DVD drive.
2. AutoPlay should automatically launch and display all of the folders on
the CD. If not, open “My Computer” and double-click on the CD/DVD
drive.
3. Enter the folder “USB 3.0 Host”, then “NEC” and double-click the file
“Setup.exe”.
4. This should launch the driver Installation wizard. Continue through the
wizard and once complete, all the necessary drivers will be installed.
Windows Vista/7/Server 2008 R2
1. Upon starting Windows, if the “Found New Hardware” wizard appears on
the screen, cancel/close the window or choose not to install the drivers
and insert the included Driver CD into the computer’s CD/DVD drive.
2. AutoPlay should automatically launch and display all of the folders on
the CD. If not, open “Computer” and double-click on the CD/DVD.
3. Enter the folder “USB 3.0 Host”, then “NEC” and double-click the file
“Setup.exe”.
4. This should launch the driver Installation wizard. Continue through the
wizard and once complete, all the necessary drivers will be installed.
