6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Hardware Installation
Installing the Full Profile Bracket
By default the
Low Profile Bracket
is attached to the
Mini
Adapter Card
. Depending on your system configuration you
may need to remove the
Low Profile Bracket
and replace it
with the
Full Profile Bracket
(included).
1.
Using a
Small Phillips Head Screwdriver
(sold separately),
remove the two
Bracket Screws
securing the
Low Profile
Bracket
to the
Mini Adapter Card
.
2.
Align the
Screw Holes
on the
Mini Adapter Card
with the
Screw Holes
on the
Low Profile Bracket
. Making sure the
Mini Adapter Card
is sitting on top of the
Screw Holes
on
the
Full Profile Bracket
.
3.
Insert the
Bracket Screws
through the
Mini Adapter Card
and into the
Screw Holes
on the
Full Profile Bracket
.
4.
Using the
Small Phillips Head Screwdriver
, tighten the
Bracket Screws,
being careful not to over-tighten.