IIn
ns
stta
alllla
attiio
on
n
1. Connect one end of the 3.5mm to 3.5mm audio cable to the speaker output of your
MP3 player, iPod, computer, or other audio source. Connect the other end of the cable
to the "AUDIO IN" jack on the Transmitter.
2. Connect one of the power supplies to the Transmitter and plug it into an electrical
outlet or other suitable power source.
3. Connect the two RCA ends of the 3.5mm to RCA audio cable to an unused pair of
inputs on your stereo amplifier, speakers, receiver, portable stereo, or other audio
output device. Connect the other end of the cable to the "AUDIO OUT" jack on the
Receiver.
4. Connect one of the power supplies to the Receiver and plug it into an electrical outlet
or other suitable power source.
5. Adjust the output volume of your audio device to about 50%. Start playback of the
song(s) you want to hear.
6. Set your audio output device to the audio input you connected the Receiver to. You
should hear the music being played from your computer.
7. If needed, press the button on the top of the Transmitter to change broadcast
channels for better sound quality. There are 8 channels.
Note
: This device operates at a frequency of 2400 ~ 2483.5 MHz, which may conflict with
nearby cordless phones or wireless routers running at similar frequencies. To avoid
signal interference between the two devices, change broadcast signals on the MP3Airlink
accordingly. Failing this, please refer to the documentation included with your cordless
phone or wireless router for information on how to change the channel frequency on your
wireless router or cordless phone.
Instruction Manual
2
