Installing Drivers (Windows 98SE)
Windows ME/2000/XP/2003 Server and supported versions of Mac OS all support
removable hard drives without additional software. Ensure you have the most current
updates installed. Computers running Windows 98SE need to install support for USB
removable mass storage devices before using the enclosure:
1. Insert the installation CD into your computer’s CD-ROM or other compatible optical
drive.
2. Double click the
My Computer
icon on the desktop. Double click the icon for the
computer’s CD-ROM drive.
3. Double click folders and files in the following order:
USB Storage Ser.
>
OTG
>
WIN98 driver
>
Setup.exe
.
4. The setup program will start. Follow the on-screen prompts to complete the
installation.
Connecting the Enclosure to a Computer
This product has been tested with Windows 98/98SE, ME, 2000, XP, 2003 Server, and
Mac OS 9.0.x, 9.2.x, and X. Other operating systems may also support this device;
consult your documentation or a computer service professional for details on whether this
product will work with your operating system and configuration.
When used with the Windows operating systems noted above, the drive enclosure is
“hot-swappable” which means the drive can be connected and disconnected while the
computer is running and will be immediately accessible to the user like any other hard
drive.
1. Place the enclosure near the computer you wish to use.
2. Using the provided USB 2.0 “Y” data cable, it to the USB connector
on the rear panel of the enclosure. Connect the opposite ends of the cable to two
available USB ports on the back of the computer or a powered USB hub. The
Access
LED indicator on the rear panel of the enclosure should light red to indicate power.
(Both connectors must be connected to the USB source to provide sufficient power for
reliable operation.)
3. Alternatively, you may also use an external power adapter (not provided) with the
device. For most configurations, you will not need more power than what can be
provided using the included USB “Y” cable. If you wish to use an external power
adapter with the drive enclosure, a universal adapter rated for 5V DC output at 1.6A
and a tip with a positive center will work with the enclosure. Most electronics stores
should be able to provide a generic adapter that meets these requirements. Be sure
to follow any precautions and usage instructions provided with the power adapter to
avoid any damage to the drive enclosure.
4. The drive should be ready to use and will be visible under
My Computer
(Windows)
or on the desktop (Mac OS).
Instruction Manual
4
