Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: June 2, 2020 2:08 PM
Product Diagram (IMC100MSFP)
Component
Function
1
PWR LED
•
Green:
An external
DC Power Source
is
detected.
•
Off:
An external
DC Power Source
is not
detected.
2
LK/Act LED
•
Green:
Indicates that a link is detected on the
SFP
.
•
Flashing:
Indicates that data is being
transmitted or received.
3
RJ45 Port
• Connect a
Network Device
to the
Media
Converter
.
Green:
•
On:
A network connection is detected.
•
Flashing:
The
Media Converter
is
transmitting/receiving data.
Amber:
•
On:
100Mbps network speed detected.
•
Off:
10Mbps network speed detected.
Industrial RJ45 to Open SFP Media Converter | Fast Ethernet 10/100 Mbps
4
DIP Switch
DIP 1:
•
Up:
Enables converter mode.
•
Down:
Enables switch mode (default).
DIP 2:
•
Up:
Enables Link Fault Pass-Through (LFP)
function, LFP highlights link failures, by forcing
a link down between both connections during
a link failure.
•
Down:
Disables LFP function (default).
5
SFP Slots
• Connect an
SFP
(100BASE-X) to the
Media
Converter
.
6
3-Pin Terminal Block
• Connect an external
DC Power Source
(12-56V
DC Input) to the
Media Converter
.
Requirements
For the latest requirements, please visit
www.startech.com/IMC100MSFP
• Network Equipment (ex. Router, Network Switch) x 1
• MSA-Compliant 100BASE-X SFP Transceiver Module x 1
• RJ45 Terminated UTP/STP CAT5e (or better) Network Cable x 1
• Terminated Fiber Optic Cable (dependent on SFP Module) x 1
• DC Power Source x 1
• Phillips Head Screwdriver x 1
• Small Flat Head Screwdriver x 1
Powering the Media Converter
Connecting and installing the
3-Wire Terminal Connector
must be completed by a
licensed Electrician.
Notes:
Make sure that you turn off the power source before connecting the power wire
to the
Media Converter
.
Do not exceed the recommend power source voltage as it may result in personal or
product damage.
1. Using a
Small Flat Head Screwdriver
, loosen the V- and V+ screws on the
3-Wire
Terminal Connector
(included).
1
6
2
3
5
4
