Instruction Manual
3
DIP Switch Settings
Installation
The Network Switch is designed to sit on a flat surface, or be securely mounted to
either a wall or DIN-Rail using the included brackets. Please follow the instructions
below, depending on your preferred installation.
Wall Mounting
1. Attach the Wall-mount brackets to either the rear, or the side of the switch,
depending on your desired orientation.
Pin #
Position
Status
Pin 1
ON
Enable power alarm
OFF
Disable power alarm
Pin 2
ON
Enable broadcast storm rate limit
OFF
Disable broadcast storm rate limit
Pin 3
ON
NOT USED
OFF
NOT USED
Pin 4
ON
NOT USED
OFF
NOT USED
Pin 5
ON
NOT USED
OFF
NOT USED
Pin 6
ON
NOT USED
OFF
NOT USED
