Instruction Manual
2
Installation
1. Insert the CD disk.
2. Plug the USB/Serial cable into your computer’s USB port and choose your PC’s OS from the
selection on your screen.
3. The Add New Hardware Wizard will appear. Click Next.
4. The Wizard will search for new drivers for the USB device. Click Next.
5. Select Search for best driver for your device (Recommended). Click Next.
6. Choose the correct OS for your PC. Click Next.
7. Windows is now ready to install the best driver for this device. Click Next.
8. Installation complete. Click Finish.
Verifying Successful Installation
1. Open the System folder (My Computer, Control Panel, System)
2. Click the “Device Manager” tab at the top of the dialogue box.
3. Click the “+” in front of the Universal Serial Bus Controller heading to see the USB controller
listing. If the Installation is completed successfully, you should see an entry for USB to
Serial Cable.
Connecting Peripheral Devices
1. With the computer booted up and the USB Serial Adapter already plugged into the
computer’s USB port, plug the peripheral into the USB Serial Adapter; then turn the
peripherals On.
2. Follow the Installation Wizard’s on-screen instructions to complete the installation.
Note:
This procedure only occurs the first time you connect up your peripheral. If your peripheral
was previously connected and configured for the RS-232 (COM) port, after you perform the
Adapter Installation and click Finish, the driver will detect it and install it automatically.
Note:
Under Windows 2000, if you connect a modem, you must specify it as a Standard Modem.
