10
Installation
Fasten the Tilting Display Mount to a Wall
Warnings!
The
Display Mount - Portrait
is designed to
be installed on a wood stud, solid concrete, or cinder block
wall. The wall structure should be capable of supporting at
least four times the weight of the mounted equipment. The
Mounting Hardware
(Mounting Screws
and
Concrete
Anchors)
included with this product may not be adequate
for installation on certain wall structures. Contact a
construction professional to install the
Display Mount -
Portrait
. Failure to do so may result in personal injury and/or
equipment damage.
The
Display Mount - Portrait
is intended for indoor use only
and should not be used outdoors.
Extension Bracket Installation
1.
Slide the
Extension Bracket
over the
Display Mounting
Bracket
and align the 4
Screw Holes
in the
Display
Mounting Bracket
with the 4
Screw Holes
in the
Extension
Bracket
. (Figure 1)
2.
Insert 4
Extension Bracket Screws - M6 x 6 mm
through
the
Extension Bracket
and into the
Display Mounting
Bracket.
3.
Use the
Phillips Head Screwdriver
to tighten the 4
Extension Bracket Screws - M6 x 6 mm
.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
