18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing the Plate Washer
5.
Using a
Phillips Head Screwdriver
, tighten the screws. Do
not over-tighten the screws.
Note:
If you encounter resistance while tightening the
screws, stop. Failure to do so may result in damages to the
Display
.
Recessed Mounting
1.
Determine the depth and diameter of the
Mounting Holes
located on the back of the
Display
.
2.
Once you determine the correct depth and diameter of the
hardware needed, place the
Spacers
over the
Screw Holes
on the back of the
Display
.
Note:
Refer to the
Spacer Combination
table (p. 20) for differ-
ent hardware combinations.
3.
Align one of the
Adapter Brackets
with the
Spacers
. Place
a
Plate Washer
over the
Screw Holes
on the
Adapter
Bracket
.
