16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4.
Insert either the
M5x14 mm
or
M6x14 mm Screws
(depending on the hardware requirement), through the
Rectangular Washers, Vertical Brackets, and into the TV.
Securing the Vertical Bracket
5.
Use a
Phillips Head Screwdriver
to tighten the screws. Do
not over-tighten the screws.
Note:
If you encounter resistance, stop tightening. Failure to
do so could result in damage to the TV.
Recessed Mounting
1.
Determine the depth and diameter of the mounting holes
located on the back of the TV.
2.
Once you determine the correct depth and diameter of the
hardware needed, Place the
Spacers
(depending on your TV
configuration) over the
Screw Holes
on the back of the
TV
.
Note:
Refer to the
Spacer Combination
table for different
hardware combinations.
