Instruction manual
15
2. Line up the
vertical brackets
with the mounting holes on the back of the TV.
3. Place the
rectangular washers
over the
vertical brackets
.
4. Insert the
M6x30 mm screws
,
M8x30 mm screws
, or
M8x50 screws
through the
washers
,
vertical brackets
,
spacers
, and into the back of the monitor.
5. Use a Phillips screwdriver to tighten the screws. (
figure 9
)
Warning!
Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to the
monitor.
figure 9
M6x30 mm screw
M8x30 mm screw
M8x50 mm screw
Washer
Spacers
Vertical bracket
