Instruction manual
8
Requirements
• A display or TV that is compatible with one of the VESA mounting hole patterns that
FPCEILPTBLP supports
• A Phillips screwdriver
Requirements are subject to change. For the latest requirements, please visit
Installation
Warning!
Make sure that the weight of the TV does not exceed the weight capacity of
this product. If you exceed the weight capacity, you might experience personal injury
or damage to the product. This product can support the following weight:
Up to 50 kg (110 lb.).
Attach the ceiling mount and pole to the ceiling
Warning!
Ceiling structures vary, and it is important to make sure that the type
of structure and mounting hardware that you are using will properly support the
mounted equipment. Failure to do so may result in personal injury and/or equipment
damage. The ceiling should be capable of supporting at least four times the weight of
the mounted equipment.
Warning!
The mounting hardware included with this product might not be adequate
for some ceiling structures. If you lack the necessary expertise to attach this product
to the ceiling that you are using, contact a construction professional to install the
FPCEILPTBLP or to provide specific mounting instructions for your ceiling.
The FPCEILPTBLP can be mounted to a flat or a sloped ceiling.
1. Use a pencil and the provided
mounting template
to mark the location on the
ceiling where you want to attach the
ceiling mount and pole
. (
figure 1
)
