FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Specifications
Supported Card
Formats
Secure Digital (SD), MultiMedia Card
(MMC), Mini-SD, Micro-SD/SDHC
(T-flash),
SDHC, SDXC, RS-MMC, Mobile-MMC
and MMC-micro, Memory Stick (MS),
Memory Stick PRO (MS-PRO), MS Duo,
MS-PRO Duo,
Memory Stick XC and Micro-MS (M2),
MSPRO-HG Duo 8-bit mode
Form Factor
USB 3.0
Operating System
Support
Windows XP/Vista/7/8, Mac OSX, and
Linux
Chipset ID
Realtek RTS5307
Connector A
1x USB 3.0 A Male
Maximum Data Transfer
Rate
5 Gbit/s
Safe Removal
To prevent damage to the contents of the memory/media card,
please ensure you are following the correct procedure for removing
storage from the operating system you are using.
• In a Windows® operating environment,
when the memory/
media card is first connected, the
Safely Remove Hardware
icon
will appear. Right-click on the icon, and select Safely Remove
Hardware. When the Safely Remove Hardware window appears,
select
USB Mass Storage Device
, then click on
Stop
. This will, in
turn, open the
Stop a Hardware Device
window. Select the USB
Mass Storage Device again, and click on
OK
, then wait for the
operating system to notify you that it can now be safely removed.
• In a MAC OS operating environment,
the added memory cards
will appear on the desktop as disk drives. To safely remove the
indicated drive(s), simply click and drag the icon to the
Trash
.
WARNING!
Please note that when removing media cards connected
to FCREADMICRO, you are required to remove/ eject the device from
within the operating system (i.e. in Windows, use the Safely Remove
Hardware function). Failure to remove devices properly can result in
lost data, or permanent damage to the card or Card Reader. See
Safe
Removal
(reverse) for further detail.
