Once the RAID set has been built, it should appear as follows, in
Disk Management
.
Note that the two individual drives have been combined:
Spanning (SPAN) Mode
Spanning Mode offers no fault tolerance, and no redundancy. If either hard drive fails,
the Span function will fail. Span HDD capacity is equivalent to the total of the two hard
disks.
To select JBOD, please set dip switch 1 to the
OFF
position, and switch 2 to the
ON
position:
Instruction Manual
10
Set the HDD size and partition type, then Click
Next
:
Please note:
Changing dip
switch settings while RAID
is being built, or is working
can result in data
loss/damage.
