Instruction Manual
4
Installing the Caddy in the Bay
1. With the handle lifted, slide the caddy into the bay until it is firmly seated. Lower the
handle to click the caddy into its proper position.
2. Insert the key and turn clockwise to lock the drive into place and supply the drive
with power. The drive will not function if the drawer has not been locked.
Removing the Drive Drawer
3. Insert the key and turn counter-clockwise to unlock the drive drawer.
4. Lift the handle and gently pull the caddy out of the bay.
NOTE: Do not unlock the drawer while the hard drive is in use. Only power down the
drive when the hard drive is idle. Once you have powered down the hard drive, wait
about 15 seconds to let the hard drive “spin down” before removing the caddy from
the bay.
Driver Installation
No driver installation is required as this is a passive device. Only the hard drive itself is
visible to the computer system.
