FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
iPad Pro® is a trademark of Apple Inc., registered in the U.S. and other countries.
Warranty Information
This product is backed by a three-year warranty.
For further information on product warranty terms and conditions, please refer to
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください
。
Misure di sicurezza
• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
- and/or -
• Connect a
SuperSpeed USB 5Gbps (USB 3.2 Gen 1) Peripheral
to the
SuperSpeed
USB Port
on the rear of the
Docking Station
.
Connect a Display
• Connect an
HDMI M/M Cable
to the
HDMI Output Port
on the
Docking Station
and to the
HDMI Input Port
on the rear of the
HDMI Display Device
.
Connect to a Network
• Connect a
Network Cable
to the
RJ45 Port
on the rear of the
Docking Station
and
to the
Network Device
.
Connect a Power Source
• Connect the
Universal Power Adapter
to the
DC Power Input Port
on the rear of
the
Docking Station
and to an
AC Electrical Outlet
.
Operation
RJ45 Port LED Indicators
LED Color
Status
Indication
Green
Solid
• Link speed is either 1000 Mbps (1 GbE), 100 Mbps,
or 10 Mbps
Off
• No connection established
Amber
Flashing
• Network traffic detected
On
• Link detected
Installation
Notes:
Installation is automatic for all modern Operating Systems.
Shutting
down the
iPad Pro®
(not sleep mode or restart) and leaving it
connected to the
Docking Station
before powering it back on, may result
in no HDMI video output. If this happens, disconnect and reconnect the
1M
USB-C Cable
(included) from the
USB-C Host Port
on the front of the
Docking
Station.
Windows 7 (and earlier) Driver Installation
1. If the
Found New Hardware
dialog box appears on the screen, close the dialog box
or click
Cancel
.
Note:
Once the
Docking Station
is connected to the
Host Device
, and if no existing
Drivers
are found, the
Docking Station
will load a
CD-ROM Device
that contains an
executable file that can be used to install the
Driver
.
2. After the
CD-ROM Device
finishes loading, run the
Installation File
.
3. Complete the on-screen instructions to finish the installation.
Note:
Download the latest software from the StarTech.com website,
.
Connect a Host Device
• Connect the
1M USB-C Cable
(included) to the
USB-C Host Port
on the front of the
Docking Station
and to the
USB-C Port
on a
Laptop
,
Computer
,
Phone,
or a
Tablet
.
Connect USB Peripherals
• Connect up to two
USB 2.0 Peripherals
to the
USB 2.0 Ports
on the rear of the
Docking Station
.
