IIn
ns
stta
alllla
attiio
on
n
Installing the Audio Receiver
Prior to making the necessary connections, please ensure that the Audio Receiver is
situated near a power outlet, as well as the speakers that will be used to broadcast the
audio signal.
1. Connect the power adapter provided, to an available power receptacle.
2. Connect the remaining end of the power adapter to the port marked
DC +9V
, located
on the back of the
Receiver
unit.
3. Insert the 3.5mm connector from the audio cable provided, into the port marked
AUDIO OUT
, located on the back of the
Receiver
unit.
4. Insert the remaining ends (RCA Audio connectors) into the audio receiver that will be
used.
5. Begin playback of the audio signal, to ensure proper transmission. If there is any loss
of quality, please click on the
Channel Select
button, until the desired sound quality
has been achieved.
S
Sp
pe
ec
ciiffiic
ca
attiio
on
ns
s
Instruction Manual
2
Adjacent Channel Rejection
>45dB @ +/- 5
MHz offset Channel Frequency
2410~2473 MHz
Channels Supported
8
Dynamic Range
45 dB (min.)
Frequency Stability
+/- 100 KHz
Image Rejection
>25dB @ the image frequency
Operating Frequency
2.4 GHz
Output Impedance
< 1 KOhm (receiver)
Power Consumption
130 mA (receiver)
Range
100 ft. (30m) open air, 30 ft. (10m) between walls
Receiver Sensitivty
-85 ddBm (min.)
Response
20 KHz, -2dB (max.)
Separation
45 dB (min.)
THD
0.6% (min.)
