Instruction Manual
2
Installation
NOTE: Check the power supply voltage before installation. It should be
the same as your local power voltage (115V for North America and 230V
for most of the European countries). Change the voltage setting if neces
-
sary.
1. Make sure that your computer is turned off and unplugged. Remove the
power cord from your old power supply.
2. Remove the cover of your system (see your computer’s user manual
for details, if necessary).
3. Disconnect all the power connectors from the mother board and the
peripheral devices such as hard drives, floppy disks, etc. Make sure
there are no devices connected to the existing power supply.
4. Remove the existing power supply from your computer case and
replace it with the new StarTech.com power supply.
5. Connect the power connectors to your motherboard and peripheral
devices.
6. Close your computer case.
7. Connect the power cord to the StarTech.com power supply.
ATXPOW350DF Connectors
