3
Install and mount the new power supply by reversing the steps used
6.
to remove the old power supply.
Connect the power connectors from the power supply to the
7.
motherboard and peripheral devices that were disconnected
previously. Note that this power supply uses a 20+4 pin ATX
connector, so it can be used on motherboards with either a 20-pin or
24-pin connector. Simply detach the extra 4-pin attachment for use
on 20-pin motherboards.
NOTE:
the detached 4-pin connector cannot be used in place of the
4-pin ATX12V (P4) connector.
Make sure any loose or unused cables from the power supply are
8.
away from fans and other moving parts.
Place the cover back onto the computer case.
9.
Make sure the power switch on the power supply is set to “0”, then
10.
insert the power cable into the socket on the power supply. If the
old power cable looks worn or damaged in any way, replace with
the supplied power cable, otherwise it is safe to reuse it.
Reconnect all other connectors/cables that were removed in Step
11.
2. Set the power switch on the power supply to “1”.