Instruction manual
8
Assembly
Attach the ARMPIVOTHD to your mounting surface
You can use either the desk clamp or grommet mount to attach the ARMPIVOTHD to
your mounting surface.
Use the desk clamp to attach the ARMPIVOTHD
Warning!
Make sure that the weight of the monitor doesn’t exceed the weight capacity
of this product. If you exceed the weight capacity, you might experience personal
injury or damage to the product. This product can support the following weight: Up to
9 kg (19.8 lb.).
1. Line up the three holes on the top of the
L bracket
(
9
) with the holes on the bottom
of the
spring arm
(
1
).
2. Insert three of the
clamp screws
(
10
) through the
L bracket
and into the bottom of
the
spring arm
.
3. Use the
4 mm hex key
(
12
) to tighten the
clamp screws
. (
figure 1
)
figure 1
Spring arm
L bracket
Clamp screw
4 mm hex key
