background image

FCC Compliance Statement

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses 

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

• Reorient or relocate the receiving antenna. 

• Increase the separation between the equipment and receiver. 

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

 

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

 

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to  

StarTech.com.  Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.  Regardless 

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of 

their respective holders.

This Class B digital apparatus complies with Canadian ICES-003. 

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. 

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation 

of the device. 

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage 

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. 

IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 

Déclaration d’exposition à la radiation: Cet équipement respecte les limites d’exposition aux rayonnements IC définies pour un environnement non contrôlé. Cet équipement doit être installé et mis en marche à une distance minimale de 20 cm qui sépare l’élément rayonnant de 

votre corps. L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver à leur proximité. 

FCC ID: X2NBL-MP02  

IC: 11232A-AP150WN1X1U 

Technical Support

 

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions.  If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. 
For the latest drivers/software, please visit www.startech.com/downloads

 

Warranty Information

 

This product is backed by a two year warranty.  

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement withequivalent products at our discretion. The 

warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

 

Limitation of Liability

 

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, 

arising out of or related to the use of the product exceed the actual price paid for the product.  Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Wireless Router

In RT mode, the AP150WN1X1U acts as a wireless router to create a wireless signal 

from a cable or DSL modem provided by an Internet Service Provider (ISP).  This allows 

multiple wireless devices to use a wired connection that normally only allows one 

device to connect.

1. 

Adjust the switch on the device to RT Mode.

2. 

Connect one end of the included Ethernet cable to the RJ45 port of the AP, and the 

other to the cable / DSL Modem.

3. 

Connect one end of the included USB cable to the USB port of the AP, and the 

other to a USB power source (e.g. laptop, USB wall charger, etc.).

4. 

Connect a wireless device to the “AP150WN1X1U” SSID, which will open your 

default web browser to access the configuration page.

Note:

 If your web browser does not open automatically, open your preferred browser 

and enter the default IP address 192.168.16.254 into the address bar.

5. 

Enter the username / password when prompted, to access the configuration page 

(Default: admin / admin).

6. 

Configure your required WAN and Wireless settings:

a. WAN Setup: Enter in your ISP username / password (typically required for DSL, not 

cable) and connection type (contact your ISP for further information if required).

b. Wireless Setup: Configure your desired SSID and Security type / Key, and click Apply 

when finished.

WiFi Repeater

In Repeater mode, the AP150WN1X1U acts as a wireless card that can amplify, relay 

and extend the range of a weak wireless signal.

Widely used in:

 Large buildings, large rooms, etc.

1. 

Adjust the switch on the device to Repeater Mode.

2. 

Connect one end of the included USB cable to the USB port of the AP, and the 

other to a USB power source (e.g. laptop, USB wall charger, etc.).

3. 

Connect a wireless device to the “AP150WN1X1U” SSID, which will open your 

default web browser to access the configuration page.

Note:

 If your web browser does not open automatically, open your preferred browser 

and enter the default IP address 192.168.16.254 into the address bar.

4. 

Enter the username / password when prompted, to access the configuration page 

(Default: admin / admin).

5. 

From the site survey list, choose the desired SSID you would like to extend / 

amplify and click Connect. 

Note:

 If your desired SSID does not appear in the list, click the Rescan button.

Reviews: