Instruction Manual
6
2. Connect the iPad to the USB 3.0 port located on the side of the docking station.
Note:
If you connect a host laptop (whether it be one or two host laptops) to the
docking station while you’re charging a first-generation iPad, the iPad will switch to
data sync mode and stop charging. To switch back to charging mode, disconnect
the host laptop and the iPad from the docking station. Then connect the iPad to the
docking station again.
Configure a display device
Use DisplayLink to configure a display device
1. Connect a display device (monitor, projector, and so on) to the docking station.
2. If necessary, to display all of the available icons, click the
Show hidden icons
arrow
on the toolbar.
3. Click the
DisplayLink
icon.
4. Click StarTech
USB3DDOCKFT.
5. In the drop-down list, click a configurable option.
Each display is configured independently from all of the connected displays.
Note:
If you’re using a computer that’s running Windows 7 or Windows 8, you can also
adjust a display device on the
Display Settings
screen.
About the display options
The following information describes the display configurations available using the
DisplayLink utility.
Extend
Select this option to display an extension of your active Windows desktop on the
display that’s connected to the docking station. When you select this option, you can
view more applications or documents at the same time. The display is extended in the
direction it was the last time that the display was in Extend mode.
For more control, click
Extend To
and select one of the options. This puts the display
into Extend mode, and places the display to the right or left, above, or below the
primary display.
Mirror
Select this option to display a duplication of the primary display on the display that’s
connected to the docking station. The resolution, color depth, and refresh rate of the
primary display are replicated on the connected display.
Note:
When the connected monitor uses a different specification than the primary
display, the system’s primary graphics adapter scales all of the settings to a lower
specification to maintain a uniform aspect ratio.
Extend To
