Instruction Manual
3
Installation
Please ensure that the driver installation is complete prior to the physical
installation (plugging in) of the USB 3.0 Video Adapter
Note:
You may need to restart your computer during the installation process. Be
sure to save any unsaved material before you install the software.
1. Download the latest software from the StarTech.com website:
www.StarTech.com/USB32DPES2
2. The software is compressed in a .zip folder. Extract the contents of the folder
to a location on your computer that’s easy to access, such as your
Desktop
or
Downloads
folder.
Note:
Ensure the USB video adapter is not connected to your computer.
3. Launch the
Setup
(.exe) file.
4. Follow the on-screen prompts to complete the installation, and if instructed to do
so, restart your computer.
5. Connect a DisplayPort cable (sold separately) to the adapter’s DisplayPort output
port and to the DisplayPort monitor’s input port.
6. Connect the built-in USB 3.0 input cable to a USB port on your computer.
Important installation notes:
•
This USB video adapter uses a Trigger family chipset. If you’re connecting
this device to a computer along with additional USB video adapters or
docking stations, avoid using devices with different family chipsets, such as
DisplayLink® or Fresco Logic®.
•
To connect multiple USB display adapters to the same computer, you don’t
need to install any additional drivers. Repeat steps 3 through 4 for each video
adapter.
•
You may be prompted to restart your computer during the installation of each
USB video adapter.
