Instruction Manual
7
Using the Utility menu
The SDOCK1EU3P includes a
Utility
menu that you can use to view information about
the eraser, including system and disk information.
View the eraser details
1. Use the
Menu navigation
buttons on the front of the eraser to move up and down
in the
Erase mode
menu.
2. Select
Utility
and press the
OK
button.
3. Do any of the following:
• To view the disk info, select
Show Disk Info
and press the
OK
button.
• To view the product name and current version of firmware, select
System Info
and press the
OK
button.
To return to the
Erase mode
menu, press the
ESC
button until you have exited the
Utility
menu.
Update the eraser firmware
1. Connect a USB 3.0 cable to your computer and the USB 3.0 port on the back of the
eraser.
2. Use the
Power
button on the back of the eraser to turn it on.
3. Place a Firmware drive in the drive bay.
Note:
You can use any type of drive, provided that it’s formatted to FAT32.
4. On your computer, copy the Firmware file to the drive in the eraser.
5. Use the
Menu navigation
buttons on the front of the eraser to move up and down
in the
Erase mode
menu.
6. Select
Utility
and press the
OK
button.
7. Select
Update System
and press the
OK
button.
8. When the LCD display says
Complete
, use the
Power
button to turn off the eraser.
9. Wait five seconds and turn on the eraser again.
To return to the
Erase mode
menu, press the
ESC
button until you have exited the
Utility
menu.