background image

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there 

is no guarantee that interference will not occur in a particular installation. If this equipment 

does cause harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the interference by 

one or more of the following measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver 

is connected.

• 

Consult the dealer or an experienced radio/TV technician for help. 

This Class [B] digital apparatus complies with Canadian ICES-003. 

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

Industry Canada

 

This Class B digital apparatus complies with Canadian ICES-003. 

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s).  

Operation is subject to the following two conditions: 
(1) This device may not cause interference, and  

(2) This device must accept any interference, including interference that may cause undesired 

operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio 

exempts de licence.  

L’exploitation est autorisée aux deux conditions suivantes: 
(1) l’appareil ne doit pas produire de brouillage, et  

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le 

brouillage est susceptible d’en compromettre le fonctionnement.

IC Radiation Exposure Statement:

 

This equipment complies with IC RSS-102 radiation exposure limit set forth for an 

uncontrolled environment. This equipment should be installed and operated with minimum 

distance 20cm between the radiator and your body.

Summary of Contents for 8STR300WN22OP5G

















Reviews: