background image

3

Contents

This package should contain:

• 1 x 6-in-1 card reader

• 1 x driver disk

Installation

This section will guide you through the installation of your multi panel and the related
software. Please read through the instructions carefully and complete each step in the
order listed.

Depending on your OS and the configuration of your system, the instructions below may
not be identical to what  you see on your screen.

Installing the Panel

1. Make sure that your system is unplugged and you are grounded.

2. Remove the cover of your system and remove the cover from a 5.25” drive bay (see 

your computer's user manual for details, if necessary).

3. Gently insert the panel into the open 5.25” bay (after threading the attached cables 

into the computer) until it is flush with the front of the case. Make sure the bracket is 
lined up with the screwholes in the case, and screw the panel into place.

4. Next you will plug in your cables. There are seven cables in all:

• 3 x USB 2.0 cables. These cables plug into open USB ports on the back of your 

computer. Two of the USB cables are for the front USB ports. The third cable 
(slightly separate from the larger group of cables) is for the card reader. 

• 1 x IEEE 1394a cable. This cable plugs into an open FireWire port on the back of 

your computer.

• 1 x black/white S/PDIF cable. The two S/PDIF connectors plug into the audio pins

on your motherboard. On the S/PDIF cable, the black wire is Ground, and the 
white 

wire is Signal. The location of the audio pins on your motherboard depends 

on your motherboard manufacturer. Check with your motherboard documentation 
before connecting the S/PDIF cable. (Some sound cards use different connectors for
S/PDIF. If you need to use the second audio connector, plug S/PDIF cable’s white
wire into Pin 4 and the black wire into Pin 6 on the second cable)

• 1 x green headphone cable. This cable plugs into the headphone port on the back of

your computer.

• 1 x pink microphone cable. This cable plugs into the pink microphone port on the 

back of your computer.

Summary of Contents for 525FCREAD












Reviews: