Instruction Manual
6
position at the transmitting end.
Profile Mode
Profile Mode is the VDSL2 profile, 17a or 30a, with 30a allowing higher bandwidth
at longer distances. Set this DIP switch to the upward (ON) position for 17a, or the
downward (OFF) position for 30a, depending on your network requirements and
preferences.
Band Mode
Band Mode places the unit in either Symmetric or Asymmetric mode. Set this DIP
switch to the upward (ON) position for Symmetric mode, with both downstream and
upstream transmissions operating on the G.997 band plan, or set to the downward
(OFF) position for or Asymmetric mode, with asymmetric short range transmissions
operating at the highest available line rate.
SNR Target
SNR Target can be set for the unit to operate with ratios up to 6 or 9 dB. Set this DIP
switch to the upward (ON) position for a SNR ratio up to 6dB, or to the downward (OFF)
position for a SNR ratio up to 9dB.
