Startec S.R.L. Rain Star 260, Programming Instructions Manual, Page: 8 / 16

MANUFACTURER menu
7
4. MANUFACTURER MENU
Accessing the “MANUFACTURER” Menu
To access the MANUFACTURER Menu, follow the procedure described in the following stages:
Note: some messages may not appear because the functions are not enabled.
S
TAGE ACTION
DISPLAY NOTE
1 Switch off the control unit [ ]
2 Switch on the control unit, keeping
the _m_and _h_ keys pressed until
the Display shows the message
"MENU"(after several seconds) and
prompts for a password [
STARTEC
]
[
R.S.26O
]
[
VER 1.18
]
[
PWD ---
]
- Manufacturer’s name
- Model of machine
- Program version
- If the password is not entered within 5
seconds by pressing a +/- key, the machine
goes into working mode
3 Press the Initial Pause _+_ or _-_
keys to display the 1st digit. [
PWD 2--
] e.g. password = 222
4 Press the Speed _+_ or _-_ keys to
display the 2nd digit. [
PWD -2-
] e.g. password = 222
5 Press the Final Pause _+_ or _-_
keys to display the 3rd digit. [
PWD --2
] e.g. password = 222
6
Press the _START_ key
[
MN MANUF
] - MeNu MANUFacturer
7 Displayed a few seconds after
releasing the _START_ button [ OK MENU ] - access to the menu enabled
8 Displayed in the event of password
error [ ERR PWD ] - Password error. Repeat procedure for stage 1
4.1 Selecting and loading a model
9 Press the _>_ cursor key, the
following is displayed [
CMOD 17
] - e.g. model code in position 17
10 Press the _v_ cursor key, the
following is displayed [
STARTEC
] - e.g. constructor name
11 Press the _^_ cursor key to return
to the previous screen [
CMOD 17
] - e.g. model code in position 17
12 Press _ENTER_ [
CMOD
*
17
] - The asterisk is displayed, enabling changes
13 Press _h_. The model
corresponding to position 17 is
displayed [
S4OOX125
] - e.g. STARTEC model with 400 m length, 125
mm diameter tube
14 - Press the _^_ or _v_ cursor keys
to scroll through the entire list of
your models and default STARTEC
models
- Press the _>_ or _<_ cursor keys
to skip 10 positions [
S5OOX1OO
] - irrigator model
15 Displayed if no keys are pressed [ CMOD * 17 ] - Model position
16 Press _ENTER_ to load the
parameters for the selected model [
R MO OK
] - Parameters successfully loaded
17 Press the _<_ cursor key to check if
the data for the selected model has
been loaded. Use the cursor keys to
scroll through the menu options [
VLV SCAR
] - the first menu option is displayed
18 If all changes are correct, Save changes, otherwise Cancel changes.