background image

Startco Engineering Ltd.

Page 9

SE-701 Ground-Fault Monitor

 

Rev. 0

Pub. SE-701-M, December 14, 2006.

Dimensions:

Height....................................75 mm (3.0")
Width.....................................55 mm (2.2")
Depth .....................................115 mm (4.5")

Shipping Weight...........................0.45 kg (1 lb.)

Environment:

Operating Temperature.........-40 to 60°C
Storage Temperature.............-55 to 80°C
Humidity ...............................85% Non-Condensing

Surge Withstand ...........................ANSI/IEEE 37.90.1-1989

(Oscillatory and Fast
Transient)

Certification ..................................CSA, Canada and USA

LR 53428

US

C

R

Australia

NOTES

(1)

  CSA Certification pending.

(2)

  Over operating temperature range of –40 to 60°C.

(3)

  CT accuracy not included.

(4)

  Trip time at 3 x trip-level setting.

(5)

  For maximum lead resistance of 1 

.

5.

  

O

RDERING 

I

NFORMATION

SE-701-0

1 120-Vac Supply
2 240-Vac Supply
3 24-Vac Supply
U Universal ac/dc Supply
D 9- to 36-Vdc Supply
T 30- to 70-Vdc Supply

EFCT-1............ Sensitive Earth-Fault CT,

5-A-primary rating, 82-mm (3.2") window

EFCT-1FC....... Flux Conditioner for EFCT-1,

70-mm (2.7”) window

EFCT-2............ Sensitive Earth-Fault CT, with

Flux Conditioner, 5-A-primary rating,
139-mm (5.5”) window

EFCT-26.......... Sensitive Earth-Fault CT,

5-A-primary rating,
26-mm (1”) window

PMA-55........... Panel-Mount Adapter

SE-EFVC......... Voltage Clamp

Consult factory for custom mounting adapters.

6.

  

W

ARRANTY

The SE-701 Ground-Fault Monitor is warranted to be

free from defects in material and workmanship for a
period of five years from the date of purchase.

Startco Engineering Ltd. will (at Startco’s option)

repair, replace, or refund the original purchase price of an
SE-701 that is determined by Startco to be defective if it
is returned to the Startco factory, freight prepaid, within
the warranty period.  This warranty does not apply to
repairs required as a result of misuse, negligence, an
accident, improper installation, tampering, or insufficient
care.  Startco Engineering Ltd does not warrant products
repaired or modified by non-Startco Engineering Ltd.
personnel.

Summary of Contents for SE-701













Reviews: