background image

FEATURES 

• Will dispense butt-cut and die-cut material.
• Adjustable photosensor for pinpoint accuracy.
• Handled lock rod makes scrap removal easy.
• No tools required for adjustment.
• Hanging capability with optional LDHANGER. (Needs to be secured properly)

NOTES

• Keep strip plate free of adhesive build-up.
• Clean photosensor with compressed air or dry cloth.
• Do not drop the dispenser or subject it to heavy shock.
• Turn off machine when not in use.

REPAIR POLICY

Contact START International to determine the nature of the problem.
Supply START with the following information:
1. Who the unit was purchased from.
2. Model number and serial number.

3. If available, date purchased and copy of invoice or packing slip.

START will issue a RMA (Return MerchandiseAuthorization) for repair.
Return machine to START, insured and prepaid.
START will notify the customer if there is a repair charge.

SPECIFICATIONS:

Model#

LD8025

LD8050

LD8100

Liner Capacity
Width

.25” to 5”

(6mm to 127mm)

.25” to 5”

(6mm to 127mm)

.25” to 5”

(6mm to 127mm)

Label Length

.125” to 12”

(.50mm to 305mm)

.50” to 12”

(.50mm to 305mm)

.50” to 12”

(.50mm to 305mm)

Roll Capacity

12” (305mm)

12” (305mm)

12” (305mm)

Feed Speed*

2”/sec (5.1cm/sec)

3.9”/sec (10cm/sec)

7.8”/sec

(19.8cm/sec)

Dimensions
Inches

14.4 (L) x 11.9 (W) x 10.4 

(H)

14.4 (L) x 11.9 (W) x 10.4 

(H)

14.4 (L) x 11.9 (W) x 10.4 

(H)

Centimeters

36.6 (L) x 30.2 (W) x 27.7 

(H)

36.6 (L) x 30.2 (W) x 27.7 

(H)

36.6 (L) x 30.2 (W) x 27.7 

(H) 

Weight

6.9 lbs (3.2kg)

8.75 lbs (4.0kg)

8.75 lbs (4.0kg) 

Electrical
Requirements

100/115V AC 0.75A 60Hz, 

220-240V AC 1.8A 50Hz  

CE available)

100/115V AC 0.75A 60Hz, 

220-240V AC 1.8A 50/60Hz 

 

CE available)

100/115V AC 0.75A 60Hz, 

220-240V AC 1.8A 50/60Hz 

 

CE available)

Summary of Contents for LD8025








Reviews: