INSTALLATION INSTRUCTIONS
1)
Make sure your PC has a working serial port
.
2)
Insert Setup Disk into your CD-ROM drive (normally drive “D:”, but this
may depend on your computer.
3)
From the Windows START button, select RUN
4)
Type “d:\setup.exe”in the white box, and select “OK”
5)
Follow the instructions on the screen when the program requests it
.
6)
The SSPP Software will be launched whenever you double -click on its
desktop icon
7)
Connect the pedal(s) to the SSPP box, and plug the box into your
computer’s serial port. Any serial port that is unus ed and working is
satisfactory; the SSPP is compatible with COM1: through COM4:
8)
Re-start Windows. Once Windows is running, the SSPP Control Panel will
be active:
Control Panel for the SSPP
9)
Select Configure from the menu, then COM Port, and select the COM port
that matches the serial port that your SSPP is plugged into. A typical
portable (notebook or laptop) PC will use either COM1: or COM2:. If you
aren’t sure, try COM1: first. Press the pedals and look for the photo of the
