Bluetooth GPS Receiver User Manual
-6-
4. Start to Use
Step 1: Charge the battery in first use
Please fully-charge the battery with at least 4 hours before you use the GPS receiver firstly.
Connect charge cable to the power plug at the
bottom and start charging
Power Indicator
:
(1)
Green
LED blinking
Power low/charging (see below detail described)
Power indicator
Bluetooth
indicator
Power switch
(2
)
Green
LED stop to blink &light up
Charge completed (LED will vanish when cable away)
Step 2: Power on, connect with Bluetooth
Push the power switch 1~2 seconds to Power on
Bluetooth indicator
:
(1) Bluetooth host searching:
3 pulses per second
(2) Bluetooth host connected:
1 pulse per second
Power
ON/OFF
switch
Bluetooth indicator
Note: Some PDA needs to restart the Bluetooth function if you need to re-connect.
Step 3: GPS function test
In firstly Use of this Receiver ,we strongly recommend to bring your Bluetooth GPS Receiver
outdoor and open sky at least 15~20 minutes for almanac update.
Power on the FGPNBT03 Bluetooth GPS
Receiver
GPS Acquisition Fix Indicator
(1) Red LED lights up continuously: Inquiring
GPS Acquisition &
Power indicator
(2) Red LED blinks (1 pulse/3 sec): Position
fixed
