OPERATING THE SNS SCOOTER
www.SNSscooters.com
29
Tipping hazard
Pulling the brake lever too harshly can cause the
scooter to tip over.
Pull the brake lever slowly to brake.
8.6 OVERLOAD PROTECTION
The overload protection switches the power off when the
motor becomes overloaded while trying to climb over
too high an obstacle, such as a curb or trying to climb
too steep of an incline.
If the motor is overloaded, the following happens:
• The scooter becomes noticeably slower and then stops
• The control system shuts down the scooter
To rectify this:
Switch the scooter off and allow it to cool down for a
few minutes.
Switch the scooter on and reverse away from the
obstacle (such as a curb) and then avoid the obstacle.
8.7 SWITCHING ON THE
HEADLIGHTS
Headlight button (in blue):
Switch on = press button once
Switch off = press button again
A switch indicator will light up to
show that the headlight is
switched on.
If you drive with the headlights on, the batteries
will drain faster and the scooter driving range will
be reduced.
8.8 USING THE HORN
Press the
horn button (in
yellow)
.
It will sound for as long as you
hold the button down.
