This product has demonstrated EMC
compliance under conditions that
included the use of compliant peripheral
devices and shielded cables (including
Ethernet network cables) between system
components. It is important that you use
compliant peripheral devices and shielded
cables between system components
to reduce the possibility of causing
interference to radios, television sets, and
other electronic devices.
Responsible party (contact for FCC
matters only):
Starry Inc. Corporate Compliance
P.O. Box 52226
Boston, MA 02205
Wireless Radio Use
This device is restricted to indoor use
when operating in the 5.15 to 5.25 GHz
frequency band.
Cet appareil doit être utilisé à l’intérieur.
Exposure to Radio Frequency Energy
The radiated output power of the wireless
technology is below the FCC radio
frequency exposure limits. Nevertheless,
it is advised to use the wireless equipment
in such a manner that the potential for
human contact during normal operation
is minimized.
The radiated output power is below the
Industry Canada(IC) radio frequency limits.
Canadian Compliance Statement
This device complies with Industry Canada
license-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference,
and (2) this device must accept any
interference, including interference that
may cause undesired operation of the
device.
Cet appareil est conforme aux normes CNR
exemptes de licence d’Industrie Canada.
Le fonctionnement est soumis aux deux
conditions suivantes : (1) cet appareil
ne doit pas provoquer d’interférences
et (2) cet appareil doit accepter toute
interférence, y compris celles susceptibles
de provoquer un fonctionnement non
souhaité de l’appareil.
