Starrett S7020, Instruction Manual

Page: 100 / 132

S7020 100
13. DO NOT USE this machine in a gaseous or explosive environment or
close of the explosive materials;
14. NEVER FORCE the machine. APPLY enough and fi rm pressure against
Pivot Shoe in the cutting operation - little or too much pressure can cause a
jump or vibration and break the Blade. NEVER OPERATE the Reciprocating
Saw without the Pivot Shoe be installed. The shaft can hit in the material to
be cut and damage the alternative mechanism;
15. DO NOT TOUCH the Blade or cut material immediately after the cutting
operation.Both can be extremely hot and can burn your skin;
16. HANDLE the machine with both hands and fi rmly as fi gure 07. ENSURE
that the user's body is positioned in such a safe and balanced manner, not
to lose control of the operation or that it is an unstable and / or insecure
position;
17. NOT PUT hand below the part.The proximity of the blade with the hand
will be hidden from the user's eyes;
18. NEVER USE hands to remove sawdust, chips or waste close the cutting
tool.REMOVE the machine closely and after MAKE the cleaning of work area,
without the aid of compressed, but with safety glasses.
DANGER:
NEVER CLAMP the machine with the cutting tool
turned up, leaving it exposed, by a vise or a bench.
This improvise is totally irregular, dangerous and
NOT approved by Starrett. This attitude may
cause accidents with serious injury and damage
to people and the equipment itself. Improvise as
this will lead to premature wear of the machine
or even to a breakage of parts, including the total
losing of the warranty.
ENGLISH