25/09/2018
Washtech CDe120 Operator Manual
9
Operator Use Guide
START
•
Turn on at wall.
•
Wash Zone:
Fit Wash Pump Inlet Filter (5).
Drain Upstand (6) .
Scrap Trays (4).
•
Rinse Zone:
Rinse Pump Filter(13) .
Scrap Trays (12).
•
Shut all doors and turn wall and Machine Power on.
•
Machine begins filling. Full light amber when tanks are full.
•
Ready light glows amber when the machine is up to required temperature.
OPERATION
•
Press Start button to operate machine.
•
Cycle light glows green while the machine is running.
•
Cycle light glows green while machine operates.
•
Stack one rack with items. Using a second empty rack, push the first rack into the inlet
zone of the machine - ensure the rack is pushed fully into the inlet to engage pawl drive.
•
Repeat for all consecutive racks.
•
For quicker washing, press Fast button to toggle faster washing speed.
NOTE: Pumps and conveyor will stop operating if the machine is left idle for 2 minutes. To
restart the pump and conveyor simply feed a new rack into the inlet of the machine.
SHUT DOWN – END OF EACH DAY
•
Press Stop button
•
Take out Drain Upstands to gravity drain the machine.
•
When tanks are visibly empty switch Power button off.
•
Proceed with Operator Care Wash Zone and Rinse Zone cleaning instructions.
SUGGESTED BEST PRACTICE
Pre-rinse
Scrape and/or rinse trays, plates & glasses in cool water
Chemical
Use a good quality non foaming commercial detergent and drying agent – do
not use domestic detergents which will cause the machine to foam
