Connection diagram 3
The connection method is recommended in case of difficulties in mounting the frame
antenna around the ignition lock cylinder in some vehicles.
Reel the loop antenna around the factory RFID antenna on ignition lock cylinder. It is
important to keep the shortest distance between factory RFID antenna and BP-06 loop
antenna.
Connect the loop antenna to XS4 socket of the module board.
Connection diagram 4
Module has the + 3.3V power source for Smart Key power supply connection.
Remove a battery from factory key and solder the module output wires to the battery
power pins on the Smart Key circuit board:
• white — to the positive contact
• black — to the negative contact.
If a key does not fit the module slot, so remove the key transponder) chip and mount it
inside the module.
