Handbook for the SX-56 Full Frame camera Issue 1, 25
th
October 2017
The SX software for this new camera is called ‘Starlight Vision’ and will perform most of the functions
that are required for taking and saving images. It also includes some camera test functions and will also
have some image processing functions in later versions (downloadable from sxccd.com). The software
may be started from the desktop icon and will automatically recognise the SX-56 when it is connected.
The CD also installs an ASCOM driver for the SX-56 and this allows camera access from popular third
party software, such as ‘Sequence Generator Pro’. It will also work with MaximDL, AstroArt, Nebulos-
ity etc.
Testing the camera:
Plug the USB cable into the camera and then connect the +12v power cable. This sequence is important
to avoid firmware loading errors.
Do not leave the power connected for long periods when a USB connection is not available, as this
can leave the electronics in an undefined state and may lead to overheating.
When first powered up, the camera may emit a loud ‘buzz’ as the shutter stepper motors attempt to set
the shutter into a closed state. Do not be concerned if this happens - it is normal. Once powered up,
start the ‘Starlight Vision’ software, and check that the camera has been detected in the ‘Camera’ tab
menu.