Handbook for the SXVR-H694
Issue 1 March 2012
3
Installing the USB system:
First, find a free USB socket on your PC and plug in the USB cable (do not connect
the camera at this time). If you do not have a USB2 capable computer, it is normally
possible to install a USB 2 card into an expansion slot.
The next operation is to run the software installer from the CD ROM provided. Insert
the CD into the computer and wait for Windows Explorer to open with the list of
folders on the ROM. Now run the SETUP.EXE file that it contains – this will initiate
the self-install software which will guide you through the process of installing the SX
camera software (SXV_hmf_usb.exe) onto your computer.
Now connect the USB cable to the socket on the camera rear panel.
Windows will report ‘Found new hardware’ and will ask for the location of the
drivers. Point the installer at the appropriate driver folder on your CD ROM (32 bit or
64 bit) and the driver installation should proceed smoothly. (Ignore any warnings
about the driver having not been tested by Microsoft).
