Manual de Instalación domo con LED`s infrarrojos modelo STPI-352CS30XLS
Santa Rosa 1501 (X5000ETE) Bº Alberdi. Córdoba. Tel/fax 54(0351) 4809210 y rotativas
mail:
www.starligh.com
9
Figure 12 Figure 13
5 Attention Items:
A
：
Please use the right power :DC12V /5A . do not use the wrong adapter.
B
：
Please don’t pull the cable directly , for fear damage the cable or lead to poor
connection by cable loose .
C
：
Please connect the speed dome shell with the ground in case the static or lightning
strike .
6. Simple troubleshooting table
Failture Issue
Possible reason
Solution
Power on, no
movement, no
image, indicator light
doesn’t on
Power cable connects wrong
Connect again
Power supply damaged
Replace
protective tube is bad
replace
power cable is connected bad
Check
Power on ,self check
,has image, can’t
control
the machine’s address code or
baud rate is wrong
Reset address code and baud rate
protocol wrong
correct it
Rs485 cable is connected wrong
check RS485 line
Can’t check itself
,has image but with
motor hoot
mechanical breakdown
check it and repair it
dome camera leans
correct it
power supply is not enough
replace it
Image unstable
video cable is not connected well
correct it
Power is not enough
replace it
Image dim
Focus in manual state
Operate the machine or adjust any
preset position to let it in auto focus
state
Dome cover is dirty
clean the dome cover
can’t control the
speed dome to
speed dome’s power is not
enough
replace the power
