Hub 20
HDMI
*
USB-A
Network
Power supply
Keypad
Antenna
Antenna
Touch 2045 controller
GT Mini 3330
1. Screw both antennas into
Hub 20
. If you want to place
Hub 20 behind a room screen, make sure that there is
enough space
2. Connect the network, room screen, and keypad to
Hub 20
.
3. Connect
Hub 20
to the
Computer In DVI-I
port of
your room system’s codec using the HDMI cable and
DVI-I adaptor provided
4. Connect the power supply to
Hub 20
. It may take a
few minutes to initialize
5. Enter the QuickConnect code using the keypad. To
generate the QC code, Admins must add
Hub 20
to
their StarLeaf portal
6. When provisioning is complete, the room screen will
turn to the idle screen until content is presented
How to install (with GT Mini 3330)
Ethernet
*
Use the DVI-I adapter to connect the HDMI cable to the codec
How to generate a QuickConnect code
1. Go to the
Room Systems
page on your Admin portal
and click
Add room system
2. Complete all required fields and ensure you select
StarLeaf Hub 20
in the
Hardware endpoint
section
3. Click
Apply
.
The QC code appears in the
Hardware
endpoint
section
The following installation shows how to add wireless sharing to a
StarLeaf room system which has
GT Mini 3330
and
Touch 2045
already installed
StarLeaf Pronto 210
Installation Guide
For more help with installing wireless sharing into any room system go to:
support.starleaf.com
480-00360-01
