STARLANE POLE STAR PRO, Installation And Instruction Manual

Page: 9 / 24

Setting the RPM reading parameters
It is necessary to set the number of pulses received for each revolution of the
crank shaft in
POLE STAR .
•
For 2-stroke or 4-stroke engines, with non-phased ignition, set the number of
pulses to 1.
•
For modern 4-stroke engines with phased ignition, the number of pulses
must be set to 0.5.
Carry out the following operations to set the parameter:
1. From the main screen, keep E pressed for 2 seconds.
2. Press DOWN ARROW 6 times to go over the RPM sub-menu.
3. Press E to enter the RPM sub-menu.
4. Press the DOWN ARROW twice and then E to change the number of pulses
for every revolution of the crank shaft - An asterisk on the right indicates that
the value can be changed with the UP ARROW and DOWN ARROW keys.
5. Press the UP ARROW to increase the number of pulses, the DOWN
ARROW to decrease it.
6. Press E to confirm the value - The asterisk will disappear.
7. Press C twice to return to the main screen.
Setting the LED Bar and the Shift light
The LED Bar lights up from left to right according to the number of engine revs.
The lighting up speed rate of the LED Bar can be set as desired. The final setting
coincides with the one of the Shift light coming on which indicates the ideal shifting
RPM and this can be set by the user according to the characteristics of engine
output. The LED Bar is usually set to cover the ideal engine running conditions.
Carry out the following operations to set the parameter:
1. From the main screen, keep key E pressed for 2 seconds.
2. Press the DOWN ARROW 6 times to go over the RPM sub-menu.
3. Press E to enter the RPM sub-menu.
4. Press E to set the lighting up RPM of the LED Bar - An asterisk on the right
indicates that the value can be changed using the UP ARROW and DOWN
ARROW keys.
5. Set the lighting up speed rate - UP ARROW to increase it or DOWN
ARROW to decrease it.
Page 8